Step 1 |
Stabilizer / Cyranic Acid |
Ad Stabilizer: Slowly ad required amount directly to skimmer |
Do not backwash or clean cartridges for 24 to 48hrs |
"If in contact with eyes rince with water for 15min (Use recommended safety measure and equipment)" |
Step 2 |
Alkalinity |
Ad Alkalinity (baking soda): Dissolve required amount in a bucket of water then ad to the pool water. |
|
If in contact with eyes rince with water for 15min (Use recommended safety measure and equipment) |
Step 3 |
PH + |
Ad PH Plus: Sprinkle required amount on the surface of the pool water. (let water circulate 4hrs before testing or adding ot product) |
Do not backwash or clean cartridges for 24 to 48hrs |
If in contact with eyes rince with water for 15min (Use Glove, safety glasses and mask) |
Step 4 |
PH - |
Ad PH Minus: Sprinkle required amount on the surface of the pool water. (let water circulate 4hrs before testing or adding ot product) |
Do not backwash or clean cartridges for 24 to 48hrs |
If in contact with eyes rince with water for 15min (Use Glove, safety glasses and mask) |
Step 5 |
Free Chlorine |
Ad Chlorinatin Granules:Dissolve required amount in a bucket of water then ad to the pool water. Always ad chemical to water NEVER water to chemical (Or Raise salt system % 20 and test again after 24hrs) |
Do not swim for min 2hrs to 4hrs For Best resolt superchlorinate at dusk |
If in contact with eyes rince with water for 20min (Use Glove, safety glasses and mask) |
Step 6 |
Total Chlorine (Shock Pool) |
Ad Chlorinatin Granules: Dissolve required amount in a bucket of water then ad to the pool water. Always ad chemical to water NEVER water to chemical (Or do a BOOST on the salt system and test again after 24hrs) For visible algae, use double the dose, for Heavy algae quatriple the dose |
Do not swim for min 4hrs For Best resolt superchlorinate (Shock) at dusk |
If in contact with eyes rince with water for 20min (Use Glove, safety glasses and mask) |
Step 7 |
Hardness |
Ad Calcium Plus: Dissolve required amount in a bucket of water then ad to the pool water |
Bucket will get warm its normal |
If in contact with eyes rince with water for 20min (Use Glove, safety glasses and mask) |
Step 8 |
Hardness |
Ad Pool Salt: Ad salt directly to pool water. It help dissolve the salt if you brush it or swim after adding salt |
Do not add to much salt! The only way to remove salt is by draining and adding fresh water to the pool |
If in contact with eyes rince with water for 15min (Use recommended safety measure and equipment) |